PRODUCTS CENTER
JN-G Structural Adhesive is a 2-component, high-strength, moisture-tolerant, modified epoxy resin liquid adhesive, which is mainly used in joint grouting for precast slab bridges or other precast concrete structures to enhance ability in load transfer, water proofing and durability.
JN-MG Epoxy Grout is a 3-component, high-strength, moisture-tolerant, high-flowability, modified epoxy grout which is widely used in grouting for bridge bearings, anchoring for machineries.
JN-TF Crack Sealant is a 2-component, high elongation, low-modulus,thixotropic, putty-like, moisture-tolerant, modified epoxy resin paste adhesive for crack sealing in moist environment, especially in vertical or overhead application.
JN-RX Elastic Mortar is a 3-component, high-toughness, modified epoxy mortar which is mainly used in repair for the nosing near expansion joints of bridges and repair for concrete pavements with damage on the surface.An JN-RX Elastic Adhesive can be prepared by mixing component A and B together(A+B) and hence an JN-RX Elastic Mortar can be produced by adding component C (A+B+C) (component C is the special aggregate). A JN-RX Elastic Concrete can be made by adding coarse aggregates into the JN-RX Elastic Mortar.
GOODBOND
Hunan Goodbond Civil Engineering Technology Development Co., LTD
Telephone：+86 13016169086
E-mail：zhouml@goodbond.com
Address: No.18,Luyun Road,National Hi-tech Industry Development Zone Changsha, P.R. China
